● Highly cited papers (by Scopus)
More than 300 times
Fe-Al-Mn-C lightweight structural alloys: a review on the microstructures and mechanical properties
Science and Technology of Advanced Materials, 14 (2013), 014205
H.S. Kim, D. W. Suh* and N. J. Kim
Stability of (Ti,M)C (M=Nb, V, Mo and W) carbide in steels using first-principle calculation
Acta Materialia, 60(2012), 208
(2013 Acta Student Award)
J. H. Jang, C. H. Lee, Y. U. Heo and D. W. Suh*
More than 200 times
Influence of Al addition on the microstructural evolution and mechanical behavior of low carbon, manganese transformation-induced plasticity steel
Metallurgical and Materials Transactions A, 41A(2010), 397
D. W. Suh*, S. J. Park, T. H. Lee, C. S. Oh and S. J. Kim
Medium Mn transformation-plasticity steels: Recent progress and challenges
Scripta Materialia, 126 (2017), 64-67
D. W. Suh* and S. J. Kim
More than 100 times
Strain partitioning and mechanical stability of retained austenite
Scripta Materialia, 63(2010), 297
J. H. Ryu, D. I. Kim, H. S. Kim, H. K. D. H. Bhadeshia and D. W. Suh*
Microstructure and tensile behavior of duplex low-density steel containing 5 mass% aluminum
Scripta Materialia, 68 (2013), 365-369
S.J. Park, B. Hwang, K. H. Lee, T. H. Lee, D. W. Suh and H. N. Han
Medium-alloy Mn-rich transformation-induced plasticity steels
Metallurgical and Materials Transactions A, 44 (2013), 286-293
D. W. Suh*, J. H. Ryu, M. S. Joo, H. S. Yang, K. Y. Lee and H. K. D. H. Bhadeshia
Effect of deformation on hydrogen trapping and effusion in TRIP-assisted steel
Acta Materialia, 60(2012), 4085-4092
J.H. Ryu, Y. S. Chun, C. S. Lee, H. K. D. H. Bhadeshia and D. W. Suh*
Role of delamination and crystallography on anisotropy of Charpy toughness in API-X80 steel
Materials Science and Engineering A, 546(2012), 314-322
M.S. Joo, D. W. Suh, J. H. Bae and H. K. D. H. Bhadeshia
Low-density steels
Scripta Materialia, 68 (2013), 337-338
D. W. Suh* and N. J. Kim
More than 50 times
Influence of partial replacement of Si by Al on the change of phase fraction during heat treatment of TRIP steels
Scripta Materialia, 57(2007), 1097
D. W. Suh*, S. J. Park, C. S. Oh and S. J. Kim
A model for transformation plasticity during bainite transformation of steel under external stress
Acta Materialia, 51 (2003), 4907-4917
H.N. Han and D. W. Suh
Austenitizing temperature and hardenability of low-carbon boron steels
Scripta Materialia, 64 (2011), 1118-1120
B. Hwang, D. W. Suh and S. J. Kim
Effects of annealing conditions on microstructure and mechanical properties of low carbon, manganese transformation-induced plasticity steel
Metals and Materials International, 15 (2009), 909-916
J. M. Jang, S. J. Kim, N. H. Kang, K. M. Cho and D. W. Suh*
Effect of aluminium on hydrogen-induced fracture behavior in austenitic Fe-Mn-C steel
Proceedings of the Royal Society A, 469 (2013), 20120458
J. H. Ryu, S. K. Kim, C. S. Lee, D. W. Suh* and H. K. D. H. Bhadeshia
Interphase precipitation in Ti-Nb and Ti-Nb-Mo bearing steel
Materials Science and Technology, 29 (2013), 309-313
J. H. Jang, Y. U. Heo, C. H. Lee, H. K. D. H. Bhadeshia and D. W. Suh*
Solubility of carbon in tetragonal ferrite in equilibrium with austenite
Scripta Materialia, 68 (2013), 195-198
J. H. Jang, H. K. D. H. Bhadeshia and D. W. Suh
Theory for hydrogen desorption in ferritic steel
Computational Materials Science, 709 (2013), 35-44
E. J. Song, D. W. Suh* and H. K. D. H. Bhadeshia
Austenite stability and heterogeneous deformation in fine-grained transformation-induced plasticity-assisted steel
Scripta Materialia, 68 (2012), 933-936
J. H. Ryu, J. I. Kim, H. S. Kim, C. S. Oh, H. K. D. H. Bhadeshia and D. W. Suh*
Method for measuring nanoscale local strain in a dual phase steel using digital image correlation with nanodot patterns
Scripta Materialia, 68 (2012), 245-248
S. H. Joo, J. K. Lee, J. M. Koo, D. W. Suh, S. Lee and H. S. Kim
Mechanical anisotropy in steels for pipelines
ISIJ International, 53 (2013), 1305-1314
M. S. Joo, D. W. Suh and H. K. D. H. Bhadeshia
Dilatometric analysis of austenite decomposition considering the effect of non-isotropic volume change
Acta Materialia, 55(2007), 2659-2669
D. W. Suh*, C. S. Oh, H. N. Nam Han and S. J. Kim
Microstructure evolution of Al-Zn-Mn-Cu-(Sc) alloy during hot extrusion and heat treatments
Journal of Materials Processing Technology, 155-156 (2004), 1330-1336
D. W. Suh*, S. Y. Lee, K. H. Lee, S. K. Lim and K. H. Oh
Atomistic investigation of k-carbide precipitation in austenitic Fe-Mn-Al-C lightweight steels and the effect of Mo addition
Scripta Materialia, 127 (2017), 97-101
J. Moon, S. J. Park, J. H. Jang, T. H. Lee, C. H. Lee, H. U. Hong, D. W. Suh, S. H. Kim, H. N. Han and B. H. Lee
Effect of Mn, Si and Cr addition on the dissolution and coarsening of pearlitic cementite during interrcritical austenitization in Fe-1mass%C alloy
Materials Characterization, 81 (2013), 56-67
G. H. Zhang, J. Y. Chae, K. H. Kim and D. W. Suh
Liquid Zn assisted embrittlement of advanced high strength steels with different microstructures
Metals and Materials International, 22 (2016), 187-195
G. S. Jung, I. S. Woo, D. W. Suh and S. J. Kim
Effect of Molybdenum and chromium on hardenability of low-carbon boron added steels
Metals and Materials International, 14 (2008), 667-672
F. Han, B. Hwang, D. W. Suh, Z. Wang, D. L. Lee and S. J. Kim
Critical assessment: Martensite-start temperature for the gamma to epsilon transformation
Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 36 (2012), 16-22
H. S. Yang, J. H. Jang, H. K. D. H. Bhadeshia, D. W. Suh
Dilatometric analysis of cementite dissolution in hypereutectoid steels containing Cr
Scripta Materialia, 65 (2011), 245-248
J. Y. Chae, J. H. Jang, G. Zhang, K. H. Kim. J. S. Lee, H. K. D. H. Bhadeshia and D. W. Suh*
Experiments to separate the effect of texture on anisotropy of pipeline steel
Materials Science and Engineering A, 556 (2012), 601-606
M. S. Joo. D. W. Suh*, J. H. Bae, M. N. Sanchez, R. Petrov, L. A. I. Kestens, H. K. D. H. Bhadeshia