In press
● Effect of microstructure on mechanical properties of 1.0G TRIP steels produced by
quenching and partitionining process
Metals and Materials International, (2025), in press
W. T. Cho, H. H. Lee and D. W. Suh*
2025
● Significant austenite decomposition during slow heating of cold-rolled medium Mn teel with a
high fraction of pre-existing austenite
S. Sadeghpour, R . Surki, S. Wang, V. Javaheri, H. Singh, M. Somani, D. W. Suh, P.
Karjalainen, J. Komi
Scripta Materialia, (2025), 116636
2024
● Influence of heating rate on the evolution of post-anneaed microstructure in Nb-Ti
microalloyed steel: Interplay with initial cold-rolled microstructure
Journal of Materials Research and Technology, 33 (2024), 8451
S. H. Hong, G. Gu, J. H. Kim and D. W. Suh*
● Hydrogen diffusion in Al-Si coating layer of press hardening steel
Metallurgical and Materials Transactions A, 55 (2024), 4304
D. G. Lee, J. H. Kim, Y. Jung and D. W. Suh*
● Ultrastrong and ductile steel weld achieved by fine interlocking microstructures with
film-like retained austenite
Nature Communications, 15 (2024), 1301
J. Moon, G. Bae, B. Y. Jeong, C. Shin, M. J. Kwon, D. I. Kim, D. J. Choi, B. H. Lee,
C. H. Lee, H. U. Hong, D. W. Suh and D. Ponge
● Development of functionally graded austenitic lightweight steel through electrically assisted
pressure solid-state joining
Materials Science and Engineering A, 891 (2024), 146003
S. Lee, J. Moon, H. Kim. Y. H. Cho, H. H. Lee, H. Choi, Y. Kim, D. W. Suh, K. Jeong,
and H. N. Han
● Influence of silicon contents on the microstructure and mechanical properties of quenching
and partitioning (Q&P) processed low carbon steel
ISIJ International, 64 (2024), 1-9
C. J Yu, C. H Seo, Y. R. Im and D. W. Suh*
● Accelation of bainitic transformation in a 0.28C-3.8Mn-1.5Si steel utilizing chemical
hetergeneity
Scripta Materialia, 239 (2024), 115779
J. H. Kim*, G. Gu, S. H. Hong, C. J. Yu, M. Koo, E. Y. Kim. A. Zargaran, J. S. Lee
and D. W. Suh*
2023
● Influence of starting microstructure on the microstructure evolution during annealing and the
yield strength in Nb-Ti microalloyed cold-rolled steel
Materials Science and Engineering, 886 (2023), 145686
S. H. Hong, J. H. Kim, J. H. Lee and D. W. Suh*
● Observation of multi-scale damage evolution in transformation-induced plasticity steel
under bending condtion
MaterialsToday Communications, 34 (2023), 150291
G. H. Gu, M. H. Seo, D. W. Suh and H. S. Kim
● Influence of partial replacement of Co with Cu on isothermal transformation kinetics
in ferrite/martensite heat resistant steel
Steel Research International, 94 (2023), 2200228
S. Ju, H. H. Lee, J. H. Shin and D. W. Suh*
● Hydrogen trapping characteristics and mechanical degradation in a duplex stainless steel
Metals and Materials International, 29 (2023), 126-134
D. G. Lee, J. H. Kim, S. H. Kim, H. Y. Ha, T. H. Lee, J. Moon and D. W. Suh*
2022
● Microstructure characterization of polycrystalline yttrium iron garents (YIGs) sintered
from the calciend sol-gel powder
Materials Characterization, 194 (2022), 112266
M. J. Kim, H. J. Ok, Y. Son, G. Gu and D. W. Suh, K. S. Lee and S. Lee
● Prediction of retained austenite fraction in quenching and partitioning (Q&P) steels
using the Gibbs Energy Balance approach
Metals and Materials International, 28 (2022), 2059-2067
S. H. Kim, J. H. Kim, J. H. Lee, D. W. Suh* and J. S. Lee*
● Room temperature quenching and partitioning (RT-Q&P) processed steel with chemically
heterogeneous initial microstructure
Materials Science and Engineering A, 851 (2022), 143651
G. Gu, J. H. Kim, H. H. Lee, A. Zargaran, M. Koo, S. H. Kim, J. S. Lee and D. W. Suh*
● Interplay of Nb addition and annealing temperature and its influence on microstructure
and tensile properties of multiphase steel
Materials Science and Engineering A, 833 (2022), 142555
J. H. Kim, S. Ju, S. H. Kim, J. S. Lee, K. H. Choi, J. H. Ryu, Y. S. Ahn and D. W. Suh*
● Microstructure and tensile properties of chemically heterogeneous steel consisting of
martensite and austenite
Acta Materialia, 223 (2022), 117506
J. H. Kim*, G. Gu, M. H. Kwon, M. Koo, E. Y Kim, J. K. Kim, J. S. Lee and D. W. Suh*
● Temperature dependent universal dislocation structures and transition of plasticity
enhancing mechanisms of the Fe40Mn40Co10Cr10 high entropy alloy
International Journal of Plasticity, 148 (2022), 103148
J. K. Kim, J. H. Kim, H. Park, R. Kim, T. Song, D. W. Suh and J. Kim
● Effect of Mo on interfacial properties of TiC reinforced Fe composite
Journal of Materials Science and Technology, 107 (2022), 252-258
S. Cho, J. Kim, I. Jo, J. H. Park, J. Lee, H. U. Hong, B. H. Lee, W. R. Hwang, D. W. Suh,
S, K. Lee and S. B. Lee
2021
● Influence of microstructure constituents on the hydrogen-induced mechanical degradation
in ultra-high strength sheet steels
Metals and Materials International, 27 (2021), 3959-3967
A. I. Hwang, D. G. Lee, Y. Jung, J. M. Koo, J. D. Cho, J. S. Lee and D. W. Suh*
● Enhanced ductility of as-quenched martensite by highly stable nano-sized austenite
Scripta Materialia, 201 (2021), 113955
J. H. Kim, G. Gu, M. Koo, E. Y. Kim, J. S. Lee and D. W. Suh
● Influence of chronological control of transformation on the microstructure and mechanical
properties of complex phase steels
Scripta Materialia, 200 (2021), 113892
H. B. Lee, H. H. Lee, Y. B. Song, J. Ham, Y. J. Kim, H. K. Kim and D. W. Suh*
● Suppression of adiabatic shear band formation by martensitic transformation of retained
austenite during split Hopkinson pressure bar test for a high-strength bainitic steel
Materials Science and Engineering A, 814 (2021), 141127
S. Kim, M. C. Jo, D. W. Suh, H. K. Kim, S. S. Sohn and S. Lee
● Ti-bearing lightweight steel with large high temperature ductility via thermally stable
multi-phase microstructure
Materials Science and Engineering A, 808 (2021), 140954
J. Moon, H. H. Jo, S. J. Park, S. D. Kim, T. H. Lee, C. H. Lee. M. G. Lee, H. U. Hong,
D. W. Suh and D. Raabe
● Hydrogen behavior in Ti-added reduced activation ferritic-martensitic steels
Metals and Materials International, 27 (2021), 425-435
K. M. Ryu, D. G. Lee, J. Moon, T. H. Lee, J. S. Lee and D. W. Suh*
● Enhanced of ballistic performance by transformation-induced plasticity in high-strength
bainitic steel
Journal of Materials Science and Technology, 84 (2021), 219-229
M. C. Jo, S. Kim, D. W. Suh, H. K. Kim, Y. J. Kim, S. S. Sohn and S. Lee
● The tensile properties and stretch-flangeability of TRIP steels produced by quenching and
partitioning (Q&P) process with different fraction of constituent phases
ISIJ International, 62 (2021), 572-581
Y. R. Im, E. Y. Kim, T. Song, J. S. Lee and D. W. Suh
● Influence of isothermal treatment prior to inital quenching of Q&P process on
microstructure and mechanical properties of medium Mn steel
ISIJ International, 62 (2021), 518-526
J. H. Kim, M. H. Kwon, J. S. Lee, S. Lee, K. Lee and D. W. Suh*
● Tantalum and molybdenum barrier to prevent carbon diffusion in spark plasma sintered
tungsten
Scripta Materialia, 196 (2021), 113759
N. Kwak, G. Min, Y. Oh, D. W. Suh, H. C. Kim, S. Kang, H. N. Han
2020
● Isothermal transformation of austenite to ferrite and precipitation behavior in 9Cr-1.5Mo-
1.25Co-VNb heat resistant steel
Materials Characterization, 170 (2020), 110677
J. Moon, T. H. Lee, S. D. Kim, C. H. Lee, J. H. Shin, B. H. Lee and D. W. Suh
● A new calss of lightweight, stainless steels with ultra-high strength and large ductility
Scientific Reports, 10 (2020), 12140
J. Moon, H. Y. Ha, K. W. Kim, S. J. Park, T. H. Lee, S. D. Kim, J. H. Jang, H. H. Jo,
H. U. Hong, B. H. Lee. Y. J. Lee, C. Lee, D. W. Suh, H. N. Han, D. Raabe and C. H. Lee
● Effect of the magnetic transition of austenite phase on austenite-to-epsilon martensitic
transformaion in Fe-Mn binary alloys
Materials Characterization, 163 (2020), 110279
S. M. Choi, J. S. Hong, J. H. Nam, W. T. Cho, D. W. Suh and Y. K. Lee
● Effect of tempering conditions on adiabatic shear banding during dynamic compression
and ballistic impact of ultra-high-strength armor steel
Materials Science and Engineering A, 792 (2020), 139818
M. C. Jo, S. Kim, D. W. Suh, S. S. Hong, H. K. Kim, S. S. Sohn and S. Lee
● Analysis of transformation stasis by the Gibbs energy balance approach modified to
consider carbon redistribution into remaining austenite
CALPHAD: Computer Coupling of Phase Diagram and Thermochemistry, 70 (2020), 101804
S. H. Kim, J. H. Kim, K. S. Park, Y. R. Im, J. H. Lee, D. W. Suh* and J. S. Lee*
● Quenching and partitioning (Q&P) processed medium Mn steel starting from
heterogeneous microstructure
Materialia, 12 (2020), 100757
J. H. Kim, M. H. Kwon, G. Gu, J. S. Lee and D. W. Suh*
● Hardness and transverse rupture strength of TiC-reinforced SKD11 steel matrix composite
Metals and Materials International, 26 (2020), 302-309
S. H. Kim, D. H. Kim, W. H. Rhee and D. W. Suh*
● Role of retained austenite on adiabatic shear band formation during high strain rate
loading in high-strength steels
Materials Science and Engineering A, 778 (2020), 139118
M. C. Jo, S. Kim. D. W. Suh, S. S. Hong, S. S. Sohn and S. Lee
● Role of grain size on deformation microstructures and stretch-flangeability of TWIP steel
Materials Science and Engineering A, 773 (2020), 138861
H. Gwon, J. H. Kim, J. K. Kim, D. W. Suh and S. J. Kim
2019
● Influence of initial microstructure on intercritical annealing behavior in medium Mn steel
Materials Science and Technology, 35 (2019), 2092-2100
Y. H. Choi, J. H.Ryu, S. W. Lee, K. Lee, B. J. Lee, J. K. Kim, J. S. Lee and D. W. Suh*
● Partially-recrystallized ferrite grains and multiple plasticity enhancing mechanism in a
medium Mn steel
Materials Characterization, 155 (2019), 109812
J. K. Kim, J. H. Kim and D. W. Suh
● Screw dislocation driven martensitic nucleation: A step toward consilience of
deformation scenario in fcc materials
Acta Materialia, 174 (2019), 342-350
T. H. Lee, S. D. Kim, H. Y. Ha, J. H. Jang, J. Moon, J. Y. Kang, C. H. Lee, S. J. Park,
W. Woo, J. H. Shin, J. W. Lee, D. W. Suh and H. U. Hong
● Austenite morphology and resistance to hydrogen embrittlement in medium Mn
transformation-induced plasticity steel
Scripta Materialia, 169 (2019) 52-56
I. K. Jeong, K. M. Ryu, D. G. Lee, Y. Jung, K. Lee, J. S. Lee and D. W. Suh*
● Effect of prior austenite grain size on hole expansion ratio of quenching and partitioning
processed medium Mn steel
JOM, 71 (2019) 1366-1374
J. H. Kim, S. W. Lee, K. Lee, J. K. Kim and D. W. Suh*
● Influence of initial pearlite morphology on the microstructure evolution during heat
treatment of 1.0C-1.5Cr steel
Metals and Materials International, 25 (2019) 9-17
Z. X. Li, C. S. Li, S. H. Kim and D. W. Suh*
2018
● Microstructure and mechanical properties of austempered medium-carbon spring steel
Metals and Materials International, 24 (2018), 693-701
S. H. Kim, K. H. Kim, C. M. Bae J. S. Lee and D. W. Suh*
● Tempering behavior of TiC-reinforced SDK11 steel matrix composite
Metals and Materials International, 24 (2018), 644-651
J. I. Hwang, S. H. Kim, Y. U. Heo, D. H. Kim, K. C. Hwang and D. W. Suh*
● Effect of molybdenum addition on hydrogen desorption of TiC precipitation-hardened steel
Metals and Materials International, 24 (2018), 532-536
E. J. Song, S. W. Baek, S. H. Nahm and D. W. Suh*
● Design of online spheroidization process for 1.0C-1.5Cr bearing steel and microstructure
analysis
Metallurgical and Materials Transactions A, 49 (2018), 1782-1794
Z. X. Li, C. S. Li, J. Y. Ren, B. Z. Li and D. W. Suh
2017
● Quantum-mechanical analysis of effect of alloying elements on epsilon-martensite start
temperature of steels
Scientific Reports, 7 (2017), 17860
J. H. Jang, J. Moon, H. Y. Ha, T. H. Lee and D. W. Suh
● Numerical modeling of moving interfaces under local equilibrium conditions
CALPHAD: Computer Coupling of Phase Diagram and Thermochemistry, 59 (2017),
164-170
J. S. Lee, D. W. Suh, Y. M. Koo and S. G. Kim
● Influence of heating rate on annealing and reverse transformation behavior of TRIP steels
having martensite as starting microstructure
Metallurgical and Materials Transactions A, 48 (2017), 5217-5122
J. I. Kim, Y. H. Choi, J. H. Ryu, S. W. Lee, K. Lee and D. W. Suh*
● Hydrogen permeation in col-rolled high-Mn twinning-induced plasticity steels
Metallurgical and Materials Transactions A, 48 (2017), 5211-5116
D. K. Han, A. I. Hwang, W. J. Byeon, S. J. Noh and D. W. Suh*
● Tensile test criterion of transformation-induced elasticity and plasticity alloys for load-
displacement measurement
Journal of Alloys and Compounds, 711 (2017), 305-311
C. H. Park, J. T. Yeom, D. W. Suh, and S. Miyazaki
● Oxidation of Si-containing low-carbon steels
Materials Science and Technology, 33 (2017), 991-997
Y. H. Choi, J. S. Lee, D. W. Suh*, K. S. Park and T. K. Jeong
● Atomistic investigations of kappa-carbide precipitation in austenitic Fe-Mn-Al-C lightweight
steels and the effect of Mo
Scripta Materialia, 127 (2017), 97-101
J. Moon, S. J. Park, J. H. Jang, T. H. Lee, C. H. Lee, H. U. Hong, D. W. Suh, S. H. Kim,
H. N. Han and B. H. Lee
● Medium Mn transformation-induced plasticity steels: Recent progress and challenges
Scripta Materialia, 126 (2017), 63-67
D. W. Suh* and S. J. Kim
2016
● Influence of initial microstructure on the heat treatment response and tensile properties
of TRIP-assisted steel
Metallurgical and Materials Transactions A, 47 (2016), 5259-5265
K. Lee, J. H. Ryu, S. W. Lee, W. H. Lee, J. I. Kim and D. W. Suh*
● Influence of initial microstructure on the reverse transformation kinetics and
microstructural evolution in TRIP-assisted steel
Metallurgical and Materials Transactions A, 47 (2016), 5352-5361
J. I. Kim, J. H. Ryu, S. W. Lee, K. Lee Y. U. Heo and D. W. Suh*
● Heat treatment response of TiC-reinforced steel matrix composite
Metals and Materials International, 22 (2016), 935-941
S. H. Kim, D. H. Kim, K. C. Hwang, S. B. Lee, S. K. Lee, H. U. Hong and D. W. Suh*
● Surface selective oxidation of Sn-added CMnSi TRIP steel
Metallurgical and Materials Transactions A, 47 (2016), 1705-1719
L. Cho, E. J. Seo, G. S. Jung, D. W. Suh and B. C. DeCooman
● Liquid Zn assisted embrittlement of advanced high strength steels with different
microstructure
Metals and Materials International, 22 (2015), 187-195
G. S. Jung, I. S. Woo, D. W. Suh and S. J. Kim
2015
● Transformation plasticity in boron-bearing low carbon steel
Metals and Materials International, 21 (2015), 799-804
H. J. Jeong, M. J. Kim, D. W. Kim, D. W. Suh, J. K. Oh and H. N. Han
● Variant selection during mechanically induced martensite transformation
by nanoindentation of metastable austenite
Scripta Materialia, 104 (2015), 13-16
Y. Kim, T. H. Ahn, J. Y. Koh, D. W. Suh and H. N. Han
● Precipitation sequence and its effect on age hardening of alumina-forming austenitic
stainless steel
Materials Science and Engineering, 645 (2015), 72-81
J. Moon, T. H. Lee, Y. U. Heo, Y. S. Han, J. Y. Kang, H. Y. Ha and D. W. Suh
● Stress development and shape change during press-hardening process using phase-
transformation based finite element analysis
International Journal of Plasticity, 73 (2015), 142-170
H. H. Bok, J. W. Choi, D. W. Suh, F. Barlat and M. G. Lee
● Non-isothermal kinetics model to predict phase transformation and hardness of 22MnB5
boron steel
Materials Science and Engineering A, 626 (2015), 67-73
H. H. Bok, S. N. Kim, D. W. Suh, F. Barlat and M. G. Lee
● Is a low-phosphorus content in steel a product requirement?
Ironmaking and Steelmaking, 42 (2015), 259-267
H. K. D. H. Bhadeshia and D. W. Suh
● Underlying structure of bulky oxide nodule on alumina-forming austenitic stainless steel
Scripta Materialia, 102 (2015), 63-66
J. Y. Kang, H. Y. Ha, M. H. Jang, M. Oh, D. W. Suh and T. H. Lee
● Stability of stainless-steel nano particle and water mixture
Powder Technology, 272 (2015), 34-44
Y. Y. Song, H. K. D. H. Bhadeshia and D. W. Suh*
● Effect of aluminium on hydrogen permeation of high-manganese twinning-induced
plasticity steel
Scripta Materialia, 99 (2015), 45-48
D. K. Han, S. K. Lee, S. J. Noh, S. K. Kim and D. W. Suh*
● Cracks in martensite plates as hydrogen traps in bearing steel
Metallurgical and Materials Transactions A, 46 (2015), 665 -673
W. Solano-Alvarez, E. J. Song, D. K. Han, D. W. Suh and H. K. D. H. Bhadeshia
● Observation of micro-scale surface morphology with microtexture development during
plane strain tensile deformation in AZ31 magnesium alloy
Metallurgical and Materials Transactions A, 46 (2015), 12 - 17
K. Lee, K. I. Kim, S. J. Kim, D. W. Suh, K. H. Oh and H. N. Han
● Pearlite growth rate in Fe-C and Fe-Mn-C steels
Materials Science and Technology, 31 (2015), 487 - 493
S. W. Seo, H. K. D. H. Bhadeshia and D. W. Suh*
● Ausforming of medium carbon steel
Materials Science and Technology, 31 (2015), 436 - 442
S. W. Seo, G. S. Jung, J. S. Lee, C. M. Bae, H. K. D. H. Bhadeshia and D. W. Suh*
2014
● Segregation of phosphorus to ferrite grain boundaries during transformation in Fe-P alloy
International Journal of Materials Research, 105 (2014), 1166 - 1172
J. I. Kim, J. H. Pak, K. S. Park, J. H. Jang, D. W. Suh* and H. K. D. H. Bhadeshia
● Selective oxidation of Al-rich, Fe-Mn-Al-C low density steels
Materials Science and Technology, 30 (2014), 1805 - 1814
T. K. Jung. G. S. Jung, K. Y. Lee, Y. B. Kang, H. K. D. H. Bhadeshia and D. W. Suh*
● Effect of second phase on the deformation and fracture behavior of multiphase low-density
steels
JOM, 66 (2014), 1837-1844
S. J. Park, Y. U. Heo, Y. H. Choi, K. Lee, H. N. Han and D. W. Suh*
● Effect of constituent phase on mechanical properties of 9Cr-1WTa reduced activation
ferritic-martensitic steels
Journal of Nuclear Materials, 455 (2014), 421-425
C. H. Lee, J. Moon, M. G. Park, T. H. Lee, M. H. Jang, H. C. Kim and D. W. Suh*
● Effect of copper addition on the characteristics of high-carbon and high chromium steels
Materials Science and Engineering A, 614 (2014), 36-44
J. Y. Kang, Y. U. Heo, H. Kim, D. W. Suh, D. Son, D. H. Lee and T. H. Lee
● Interaction of aluminium with hydrogen in twinning-induced plasticity steel
Scripta Materialia, 87 (2014), 9-12
E. J Song, H. K. D. H. Bhadeshia and D. W. Suh*
● Austenite in transformation-induced plasticity steel subjected to multiple isothermal heat-
treatments
Metallurgical and Materials Transactions A, 45 (2014), 4201-4209
V. T. Duong, Y. Y. Song, K. S. Park, H. K. D. H. Bhadeshia and D. W. Suh*
● Dissolution behavior of NbC during slab reheating
ISIJ International, 54 (2014), 1677-1681
H. Y. Lee, K. S. Park, J. H. Lee, Y. U. Heo, D. W. Suh* and H. K. D. H. Bhadeshia
● Fabrication of ultrafine-grained structure by compositional pinning technique
Acta Materialia, 77 (2014), 236-247
Y. U. Heo, D. W. Suh and H. C. Lee
● Critical assessment 2: Hydrogen-induced fracture in austenitic, high manganese TWIP steel
Materials Science and Technology, 30 (2014), 1131-1134
D. W. Suh*
● Hydrogen diffusion and the percolation of austenite in nanostructured bainitic steel
Proceedings of the Royal Society A, 470 (2014), 20140108
L. Fielding, E. J. Song, D. K. Han, H. K. D. H. Bhadeshia and D. W. Suh
● Thermo-mechanical-metallurgical modeling for hot-press forming in consideration of the
prior austenite deformation effect
International Journal of Plasticity, 58 (2014), 154-183
H. H. Bok, J. W. Choi, F. Barlat, D. W. Suh and M. G. Lee
● Hydrogen and aluminium in high-manganese twinning-induced plasticity steel
Scripta Materialia, 80 (2014), 9-12
D. K. Han, Y. M. Kim, H. N. Han, H. K. D. H. Bhadeshia and D. W. Suh*
● Toughness anisotropy in X70 and X80 linepipe steels
Materials Science and Technology, 30 (2014), 439-446
M. S. Joo, D. W. Suh*, J. H. Bae and H. K. D. H. Bhadeshia
2013
● Effect of nickel content on the neutron irradiation embrittlement of Ni-Mo-Cr steels
Metals and Materials International, 19 (2013), 1203-1208
C. H. Lee, R. Kasada, A. Kimura, B. S. Lee, D. W. Suh* and H. C. Lee
● Effect of hydrogen on the surface energy of ferrite and austenite
Corrosion Science, 77 (2013), 379-384
E. J. Song, D. W. Suh* and H. K. D. H. Bhadeshia
● Estimation of phase fraction in dual phase steel using microscopic characterization and
dilatometric analysis
Materials Characterization, 84 (2013), 205-215
J. Y. Kang, S. J. Park, D. W. Suh* and H. N. Han
● Mechanical anisotropy in steels for pipelines
ISIJ International, 53 (2013), 1305-1314
M. S. Joo, D. W. Suh and H. K. D. H. Bhadeshia
● Modelling the coarsening behaviour of TiC precipitates in high-strength, low-alloy steels
Materials Science and Technology, 29 (2013), 1074-1079
J. H. Jang, C. H. Lee, H. N. Han, H. K. D. H. Bhadeshia and D. W. Suh*
● Theory of hydrogen desorption in ferritic steel
Computational Materials Science, 79 (2013), 36-44
E. J. Song, D. W. Suh* and H. K. D. H. Bhadeshia
● Effect of Mn, Si and Cr addition on the dissolution and coarsening of pearlitic cementite
during intercritical austenitization in Fe - 1 mass% C alloy
Materials Characterization, 81 (2013), 56-67
G. H. Zhang, J. Y. Chae and K. H. Kim and D. W. Suh*
● Austenite stability and heterogeneous deformation in fine-grained transformation-induced
plasticity assisted steel
Scripta Materialia, 68 (2013), 933-936
J. H. Ryu, J. I. Kim, H. S. Kim, C. S. Oh, H. K. D. H. Bhadeshia and D. W. Suh*
● Fe-Al-Mn-C lightweight structural alloys: a review on the microstructures and mechanical
properties
Science and Technology of Advanced Materials, 14 (2013), 014205
H. S. Kim, D. W. Suh* and N. J. Kim
● Kinetic transition during the growth of proeutectoid ferrite in Fe-C-Mn-Si quaternary steel
Metals and Materials International, 19 (2013), 153-158
G. H. Zhang, Y. U. Heo, E. J. Song and D. W. Suh*
● Interphase precipitation in Ti-Nb and Ti-Nb-Mo bearing steel
Materials Science and Technology, 29 (2013), 309-313
J. H. Jang, Y. U. Heo, C. H. Lee, H. K. D. H. Bhadeshia and D. W. Suh*
● Effect of aluminium on hydrogen-induced fracture behavior in austenitic Fe-Mn-C steel
Proceedings of the Royal Society A, 469 (2013), 20120458
J. H. Ryu, S. K. Kim, C. S. Lee, D. W. Suh* and H. K. D. H. Bhadeshia
● Microstructure and tensile behavior of duplex low-density steel containing 5 mass%
aluminum
Scripta Materialia, 68 (2013), 365-369
S. J. Park, B. Hwang, K. H. Lee, T. H. Lee, D. W. Suh and H. N. Han
● Low-density steels
Scripta Materialia, 68 (2013), 337-338
D. W. Suh* and N. J. Kim
● Method for measuring nanoscale local strain in a dual phase steel using digital image
correlation with nanodot patterns
Scripta Materialia, 68 (2012), 245-248
S. H. Joo, J. K. Lee, J. M. Koo, D. W. Suh, S. Lee and H. S. Kim
● Medium-alloy Mn-rich transformation-induced plasticity steels
Metallurgical and Materials Transactions A, 44 (2013), 286-293
D. W. Suh*, J. H. Ryu, M. S. Joo, H. S. Yang, K. Y. Lee and H. K. D. H. Bhadeshia
● Solubility of carbon in tetragonal ferrite in equilibrium with austenite
Scripta Materialia, 68 (2013), 195-198
J. H. Jang, H. K. D. H. Bhadeshia and D. W. Suh
2012
● Displacive phase transformation and surface effects associated with confocal laser
scanning microscopy
Metallurgical and Materials Transactions A, 43(2012), 4520-4524
J. H. Pak, D. W. Suh and H. K. D. H. Bhadeshia
● Oxidation of silicon-containing steel
Ironmaking and Steelmaking, 39(2012), 599-604
E. J. Song, D. W. Suh* and K. H. D. H. Bhadeshia
● Retention of delta-ferrite in aluminum alloyed TRIP-assisted steels
Proceedings of the Royal Society A, 468(2010), 2904-2914
Y. J. Choi, D. W. Suh* and H. K. D. H. Bhadeshia
● Electrochemical hydrogen permeation measurement through TRIP steel under loading
condition of phase transition
Electrochemistry Communications, 24(2012), 112-115
S. J. Kim, D. W. Yun, D. W. Suh and K. Y. Kim
● Experiments to separate the effect of texture on anisotropy of pipeline steel
Materials Science and Engineering A, 556(2012), 601-606
M. S. Joo, D. W. Suh*, J. H. Bae, N. Sanchez Mouriño, R. Petrov, L. A. I. Kestens
and H. K. D. H. Bhadeshia
● Effect of deformation on hydrogen trapping and effusion in TRIP-assisted steel
Acta Materialia, 60(2012), 4085-4092
J. H. Ryu, Y. S. Chun, C. S. Lee, H. K. D. H. Bhadeshia and D. W. Suh*
● Influence of silicon in low density Fe-C-Mn-Al steel
Metallurgical and Materials Transactions A, 43(2012), 1731-1735
Y. U. Heo, Y. Y. Song, S. J. Park, H. K. D. H. Bhadeshia and D. W. Suh*
● Analysis of transformation plasticity in steel using a finite element method coupled with
a phase field model
PLoS ONE, 7 (2012), e35987
Y. G. Cho, J. Y. Kim, H. H. Cho, P. R. Cha, D. W. Suh, J. K. Lee and H. N. Han
● Role of delamination and crystallography on anisotropy of Charpy toughness in API-X80
steel
Materials Science and Engineering A, 546(2012), 314-322
M. S. Joo, D. W. Suh, J. H. Bae and H. K. D. H. Bhadeshia
● Bainite : Fragmentation of crystallographically homogeneous domains
International Journal of Materials Research, 103(2012), 476-482
J. H. Pak, D. W. Suh and H. K. D. H. Bhadeshia
● Promoting the coalescence of bainite platelets
Scripta Materialia, 66(2012), 951-953
J. H. Pak, D. W. Suh and H. K. D. H. Bhadeshia
● Growth kinetics of proeutectoid ferrite in Fe-0.1C-1.5Mn-1Si quaternary and
Fe-0.1C-1.5Mn-1Si-0.2Al quinary alloys
Metallurgical and Materials Transactions A, 43A(2012), 833
G. Zhang, R, Wei, M. Enomoto and D. W. Suh*
● Spot weldability of TRIP-assisted steels with high carbon and aluminum content
Science and Technology of Welding and Joining, 17(2012), 92
G. S. Jung, K. Y. Lee, J. B. Lee, H. K. D. H. Bhadeshia and D. W. Suh*
● Critical assessment: Martensite-start temperature for the austenite to epsilon
transformation
CALPHAD: Computer Coupling of Phase Diagram and Thermochemistry, 36(2012), 16
(Selected as Top 25 hottest articles appeared in CALPHAD)
H. S. Yang, J. H. Jang, D. W. Suh and H. K. D. H. Bhadeshia
● More complete theory for the calculation of the martensite-start temperature in steels
ISIJ International, 52(2012), 171
H. S. Yang, D. W. Suh and H. K. D. H. Bhadeshia
● Stability of (Ti,M)C (M=Nb, V, Mo and W) carbide in steels using first-principle calculation
Acta Materialia, 60(2012), 208
(2013 Acta Student Award)
J. H. Jang, C. H. Lee, Y. U. Heo and D. W. Suh*
2011
● Finite element analysis of dimensional non-isotropy during phase transformation in
microstructurally banded steel
Scripta Materialia, 65(2011), 569
Y. G. Cho, D. W. Suh, J. K. Lee and H. N. Han
● A finite element modeling of dilatometric anisotropy in steel
Metallurgical and Materials Transactions A, 42A(2011), 2094
Y. G. Cho, Y. R. Im, J. K. Lee, D. W. Suh, S. J. Kim and H. N. Han
● Dilatometric analysis of cementite dissolution in hypereutectoid steels containing Cr
Scripta Materialia, 65(2011), 245
J. Y. Chae, J. H. Jang, G. Zhang, K. H. Kim. J. S. Lee, H.K.D.H. Bhadeshia
and D. W. Suh*
● Austenitizing temperature and hardenability of low-carbon boron steels
Scripta Materialia, 64(2011), 1118 (Selected as Top 25 hottest articles appeared in Scripta
Materialia)
B. Hwang, D. W. Suh and S. J. Kim
2010
● Influence of Al on microstructure and mechanical behaviors of Cr-containing
transformation-induced plasticity steel
Metallurgical and Materials Transactions A, 41A(2010), 3276
D. W. Suh*, S. J. Park, H. N. Han and S. J. Kim
● Influence of Al addition on the microstructural evolution and mechanical behavior of low
carbon, manganese transformation-induced plasticity steel
Metallurgical and Materials Transactions A, 41A(2010), 397
D. W. Suh*, S. J. Park, T. H. Lee, C. S. Oh and S. J. Kim
● Dual orientation and variant selection during diffusional transformation of austenite to
allotriomorphic ferrite
Journal of Materials Science, 45(2010), 4126
D. W. Kim, D. W. Suh, R. S. Qin and H. K. D. H. Bhadeshia
● Strain partitioning and mechanical stability of retained austenite
Scripta Materialia, 63(2010), 297 (Selected as Top 25 hottest articles appeared in Scripta
Materialia)
J. H. Ryu, D. I. Kim, H. S. Kim, H. K. D. H. Bhadeshia and D. W. Suh*
Before 2009
● Microstructure and mechanical behaviors of 0.1C-13Mn metastable austenitic steel
Metallurgical and Materials Transactions A, 40A(2009), 264
D. W. Suh*, S. J. Park, C. H. Lee and S. J. Kim
● Effect of annealing condition on microstructure and mechanical properties of low carbon,
manganese transformation-induced plasticity steel
Metals and Materials International, 15(2009), 909
J. M. Jang, S. J. Kim, N. H. Kang and K. M. Cho and D. W. Suh*
● A Microstructure-based analysis for transformation induced plasticity and mechanically
induced martensitic transformation
Materials Science and Engineering A, 485(2008), 224
H. N. Han,C. G. Lee, D. W. Suh and S. J. Kim
● Dilatometric analysis of austenite formation during intercritical annealing
Metals and Materials International, 14(2008), 275
D. W. Suh*, C. S. Oh and S. J. Kim
● Influence of Cr and Ni on microstructural evolution during heat treatment of low carbon
TRIP steels
Metallurgical and Materials Transactions A, 39A(2008), 2015
D. W. Suh*, S. J. Park and S. J. Kim
● Diffusion controlled recrystallization and grain growth-induced plasticity of steel under
externally applied stress
Philosophical Magazine, 88(2008), 1811
H. N. Han, S. J. Kim, M. Kim, G. Kim, D. W. Suh and S. J. Kim
● Effect of molybdenum and chromium on hardenability of low-carbon boron-added steels
Metals and Materials International, 14(2008), 667
F. Han,B. Hwang, D. W. Suh, Z. Wang, D. L. Lee and S. J. Kim
● Diffusion controlled transformation plasticity of steel under externally applied stress
Philosophical Magazine, 87(2007), 159
H. N. Han, J. G. Lee, D. W. Suh and S. J. Kim
● Effects of phosphorous addition on mechanical properties and retained austenite stability
of 0.15C-1.5Mn-1.5Al TRIP-aided Cold Rolled Steels
Metals and Materials International, 13(2007), 13
C. Jing, D. W. Suh, C. S. Oh, Z. Wang and S. J. Kim
● Plastic strain due to isothermal transformation from austenite to ferrite in IF and low
carbon steels
Materials Transaction, 48(2007), 882
D. W. Suh*, H. N. Han and S. J. Kim
● Dilatometric analysis of austenite decomposition considering the effect of non-isotropic
volume change
Acta Materialia, 55(2007), 2659
D. W. Suh*, C. S. Oh, H. N. Nam Han and S. J. Kim
● Boundary migration induced plasticity during recrytallization and growth under applied
stress
Materials Science Forum, 558-559(2007), 533
Se-Jong Kim,Yi-Gil Cho, D. W. Suh, S. J. Kim, G. Kim and H. N. Han
● Crytallographic texture in low alloy TRIP steel
Materials Science Forum, 558-559(2007), 1423
S. J. Park, D. W. Suh, C. S. Oh and S. J. Kim
● Influence of partial replacement of Si by Al on the change of phase fraction during heat
treatment of TRIP steels
Scripta Materialia, 57(2007), 1097
D. W. Suh*, S. J. Park, C. S. Oh and S. J. Kim
● Dilatometric analysis of phase fraction during austenite decomposition into banded
microstructure in low carbon steel
Metallurgical and Materials Transactions A, 38A(2007), 2963
D. W. Suh*, C. S. Oh, H. N. Han and S. J. Kim
● Calculation of transformation plasticity during coherent transformation of steel
ISIJ International, 46(2006), 341
D. W. Suh*, H. N. Han and S. J. Kim
● Deformation behaviors of 6061 and 7075 aluminum tubes at elevated temperature for
warm hydroforming
Materials Science Forum, 475-479(2005), 373
D. W. Suh*, S. M. Sohn, M. Y. Lee and S. Y. Lee
● Limit of ferrite grain refinement by severe plastic deformation of austenite
Metallurgical and Materials Transactions A, 36A(2005), 1057
D. W. Suh*, C. S. Oh and S. J. Kim
● Variant selection in mechanically induced martensite transformation of metastable
austenitic steel
ISIJ International, 45(2005), 1217
S. H. Lee, J. Y. Kang, H. N. Han, K. H. Oh, H. C. Lee, D. W. Suh and S. J. Kim
● Microstructures and electrical conductivity of Cu-Ca alloys for high efficiency induction
motors
Materials Science Forum, 449-452(2004), 685
K. Y. Sohn, D. W. Suh and S. Y. Lee
● Rapid grain growth of hot extruded Al-Zn-Mg-Cu-(Sc) alloy during heat treatment
Materials Science Forum, 449-452(2004), 605
D. W. Suh*, S. Y. Lee, J. Y. Kang and K. H. Oh
● Analysis of transformation plasticity during bainite transformation of steel under
externally applied stress
Metals and Materials International, 10(2004), 221
H. N. Han,C. S. Oh, D. W. Suh, C. G. Lee, T. H. Lee and S. J. Kim
● Effect of initial grain size on hot deformed structure of Ni-30Fe alloy
Metallurgical and Materials Transactions A, 35A(2004), 3399
D. W. Suh*, J. Y. Cho and K. Nagai
● Microstructural evolution of Al-Mg-Cu-(Sc) alloy during hot extrusion and heat treatment
Journal of Materials Processing Technology, 155-156(2004), 1330
D. W. Suh*, S. Y. Lee, K. H. Lee, S. G. Lim and K. H. Oh
● Effect of pretreatment conditions on warm hydroformability of 7075 aluminum tubes
Journal of Materials Processing Technology, 155-156(2004), 1337
M. Y. Lee, S. M. Sohn, C. Y. Kang, D. W. Suh and S. Y. Lee
● Effect of external stress on the orientation distribution of ferrite
Scripta Materialia, 48(2003), 91
J. H. Kang, D. W. Suh, J. Y. Cho, K. H. Oh and H. C. Lee
● A Model for transformation plasticity during bainite transformation of steel under external
stress
Acta Materialia, 51(2003), 4907
H. N. Nam Han and D. W. Suh
● Evaluation of deviation angle of ferrite from Kurdjumov-Sachs relationship in low
carbon steels by EBSD
Scripta Materialia, 46(2002), 375
D. W. Suh*, J. H. Kang, K. H. Oh and H. C. Lee
● Dynamic restoration process of Ni-30Fe alloy during hot deformation
ISIJ International, 42(2002), 432
D. W. Suh*, S. Torizuka, A. Ohmori, T. Inoue and K. Nagai
● Evaluation of dislocation density from flow curves of hot deformed austenite
ISIJ International, 42(2002), 564
D. W. Suh*, J. Y. Cho, K. H. Oh and H. C. Lee
● Evaluation of the orientation distribution of intergranular ferrite grains dynamically
formed during deformation in a V added low carbon steel by EBSD
Materials Science Forum, 408-412(2002), 1239
J. Y. Cho, D. W. Suh, J. H. Kang and H. C. Lee
● Serration of grain boundary in Ni-30Fe alloy through high temperature deformation
ISIJ International, 42(2002), 1026
D. W. Suh*, T. Inoue, S. Torizuka, A. Ohmori and K. Nagai
● Orientation distribution of proeutectoid ferrite nucleated at prior austenite grain
boundaries in vanadium-added steel
ISIJ International, 42(2002), 1321
J. Y. Cho, D. W. Suh, J. H. Kang and H. C. Lee
● FEM modeling of flow curves for ferrite/pearlite two-phase steels
ISIJ International, 41(2001), 782
D. W. Suh*, J. H. Bae, J. Y. Cho, K. H. Oh and H. C. Lee